 |
Printable Version |
MSDS (Requires Adobe®
Reader®) |
|
SPECIFICATION
SHEETUltra-Phos
18½% Monocalcium Phosphate (Feed Grade) |
PRODUCT DESCRIPTION |
Ultra-Phos is manufactured by reacting feed grade defluorinated phosphoric acid with high grade calcium carbonate under controlled conditions. A unique process produces a product with a very high percentage of monocalcium phosphate mixed with a small amount of dicalcium phosphate. The predominant compound is monocalcium phosphate monohydrate. The result is a product which contains a higher percentage of monocalcium phosphate than most commercial feed grade calcium phosphates. |
GUARANTEED ANALYSIS |
| Phosphorus (P), not less than |
18.50% |
| Calcium (Ca), not less than |
18.00% |
| Calcium (Ca), not more than |
22.00% |
| Fluorine (F), not more than |
0.185% |
|
PHYSICAL CHARACTERISTICS |
| Average Bulk Density |
60.00 lbs per cu. ft. |
|
TYPICAL ANALYSIS |
| Phosphorus (P) |
18.90% |
| Phosphorus (P), from monocalcium phosphate |
13.00% |
| Phosphorus (P), from monocalcium phosphate (% of total) |
70.00% |
| Calcium (Ca) |
18.77% |
| Fluorine (F) |
10.2 ppm |
| Iron (Fe) |
9719 ppm |
| Magnesium (Mg) |
4770 ppm |
| Sulfur (S) |
6691 ppm |
| pH |
3.20 |
|
|
